DIN 18182-2 (R/G) - 2010
Accessories For Use With Gypsum Plasterboards - Nails DIN 18182-4 - 1987
Accessories For Use With Gypsum Plasterboards; Nails DIN 705 - 2007
Adjusting Rings DIN EN 3007 - 1996
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ DIN EN 3006 - 1994
Aerospace Series-Screws, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ DIN 65438 - 1993
Aerospace; Bihexagonal Head Bolts, Close Tolerance, With Mj-thread, Short Thread Length, In Titanium Alloy; Nominal Tensile Strength 1100 Mpa, For Temperatures Up To 315 °c DIN 65517 - 2002
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy DIN 11014 - 1968
Agricultural Equipment; Countersunk Double-nip Bolts, Sinkings, Metric Thread, Finish DIN 11015 - 1995
Agricultural Machinery - Flat Countersunk Square Neck Bolts With Short Square DIN 980 (V) - 1987
All-Metal Prevailing Torque Type Hexagon Nuts with Single Piece Metal (Type V)

6

DIN 71803 - 1988
Angle Joints With Screw Studs, With Rivet Studs DIN 71805 - 1990
Angle Joints; Housings, Circlips DIN 71802 - 1992
Ball Joints With Or Without Circlips DIN 319 - 2013
Ball Knobs - Type C DIN 319 - 1978
Ball knobs [Type C] DIN 15237 - 1980
Belt screws，Continuous Mechanical Handling Equipment; Seating Screws And Cupped Washers For The Attachment Of Components To Belts DIN 2510-5 (NF / TF) - 1971
Bolted Connections With Reduced Shank Hexagon Nuts DIN 2510-7 (D / E) - 1971
Bolted Connections With Reduced Shank; Extension Sleeves DIN 2510-6 - 2013
Bolted Connections With Waisted Shank - Cap Nuts DIN 2510-6 - 1974
Bolted Connections With Waisted Shank - Cap Nuts DIN 787 - 2005
Bolts and Screws for T-slots

1

DIN 34800 - 2000
Bolts And Screws With External Hexalobular Driving Feature With Small Flange DIN 7338 (A) - 1993
Brake and clutch lining rivets DIN 7338 (A) - 2011
Brake And Clutch Lining Rivets, Form A DIN 7338 (B) - 2011
Brake And Clutch Lining Rivets，Semitubular Rivet DIN 7338 (B) - 1993
Brake and clutch lining rivets，semitubular rivet DIN 7338 (C) - 2011
Brake And Clutch Lining Rivets，Tubular Rivet DIN 7338 (C) - 1993
Brake and clutch lining rivets，tubular rivet DIN 7337 (B) - 1991
Break manderl blind rivets ，countersunk head

3

DIN 7337 (A) - 1991
Break manderl blind rivets ，flat head

3

DIN 439 (-2) - 1987
Chamfered Hexagon Thin Nuts—Product Grades A and B

2

DIN EN ISO 4035 - 2013
Chamfered Hexagon Thin Nuts—Product Grades A and B

2

DIN 34821 - 2005
Cheese Head Screws With 12 Point Socket DIN 34822 - 2005
Cheese Head Screws With Flange With 12 Point Socket DIN 28129 - 1990
Clamp nuts; For covers DIN 1444 - 1974
Clevis Pins with Head DIN EN 22341 - 1992
Clevis Pins with Head DIN 1445 - 1977
Clevis pins with head and stud end

1

DIN 1445 - 2011
Clevis Pins with Head and Threaded Portion

1

DIN 1434 - 1977
Clevis Pins With Small Head; Finish M DIN 6378 - 1974
Clip bolts DIN EN ISO 15974 - 2001
Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

1

DIN EN ISO 15973 - 2001
Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - AIA/St

1

DIN EN ISO 15976 - 2003
Closed End Blind Rivets With Break Pull Mandrel And Protruding Head - St/St DIN EN ISO 16585 - 2003
Closed End Blind Rivets With Pull Mandrel And Protruding Head – A2/SSt DIN EN ISO 15975 - 2003
Closed End Bling Rivets With Break Pull Mandrel And Protruding Head - AI/AIA DIN 16903 (R) - 1974
Closed Insert Nuts For Plastics Mouldings - Hex With Shoulder - Type R DIN 16903 (P) - 1974
Closed Insert Nuts For Plastics Mouldings - Hex Without Shoulder - Type P DIN 16903 (Q) - 1974
Closed Insert Nuts For Plastics Mouldings - Round Without Shoulder - Type Q DIN 16903 (S) - 1974
Closed Insert Nuts For Plastics Mouldings - Round Without Shoulder - Type S DIN 16903 (G) - 1974
Closed Insert Nuts With Disk For Plastics Mouldings - Hex With Shoulder - Type G DIN 16903 (E) - 1974
Closed Insert Nuts With Disk For Plastics Mouldings - Hex Without Shoulder - Type E DIN 16903 (F) - 1974
Closed Insert Nuts With Disk For Plastics Mouldings - Round Without Shoulder - Type F DIN 16903 (H) - 1974
Closed Insert Nuts With Disk For Plastics Mouldings-round With Shoulder - Type H DIN 82103 - 2005
Components for liftig,towing,lashing—Shackle,bow-Stainless steels DIN 82103 - 1987
Components for liftig,towing,lashing—Shackle,bow-Stainless steels DIN 82101 - 2005
Components for liftig,towing,lashing—Shackle,dee-Non-alloy quality steels DIN 82101 - 1976
Components for liftig,towing,lashing—Shackle,dee-Non-alloy quality steels DIN 5586 - 1989
Compressed Air Equipment for Rail Vehicles; Locking Screws with Collar and Vent

2

DIN 7643 - 2005
Compression Couplings - Hollow Screws For Ring-Type Banjos